bright view electronics co.,ltd dice material : gan blue light color : white color lens color : water transparent stand-off p/n : BVU-5M5WI5 r radiation pattern tolerance 0.25 L absolute maximum ratings at ta = 25 unit mw ma ma v ma/ o c electrical / optical characteristics at ta = 25 symbol unit v f forward voltage v i r reverse current a 2 1/2 viewing angle deg i v luminous intensity mcd bin grade limits (if=20 ma) luminous intensity / mcd bin p q r s tolerance 15%mcd min. 4650 6000 7800 10000 max. 6000 7800 10000 13000 *bright view reserves the rights to alter specifications and remove availability of products at any time without notice. *dominant wavelength, d is according to cie chromaticity diagram base on color of lamps. 2010/1/26 ? a * 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. *these products are sensitive to static electricity. caution must be taken strictly to avoid static electricity. please contact our sales department for more information. lead solder temperature 1.6 mm below package 260 for 5 seconds (tsld) test cond. min. typ. max. parameter 3.2 i f = 20 ma i f = 20 ma 30 4650 6000 derating linear from 25 0.4 10 operating temperature range (topr) 30 to 80 storage temperature range (tstg) 40 to 100 4.0 v r = 5v i f = 20 ma peak forward current ( 1/10 duty cycle , 10ms pulse width ) (i fp ) 100 reverse voltage (v r ) 5 power dissipation (p d ) 120 continuous forward current (i f )30 parameter max. ultra brightness led lamp BVU-5M5WI5 package configuration description cathode cathode 1.3 5.9 5.9 4.9 5.0 7.6 1.0 25.4min. 2.54 12.0 0.5 2.54 25.4min. 1.0 1.0min. 0.5 1.0max. 60 0 30 -60 -30 relative luminous intensity ( iv % ) 0 25 50 75 100 25 50 75 100
bright view electronics co.,ltd bin grade limits (if=20 ma) chromaticity coordinates x 0.260 0.260 0.275 0.275 x 0.320 0.320 0.335 0.335 y 0.200 0.240 0.260 0.220 y 0.290 0.330 0.350 0.310 x 0.275 0.275 0.290 0.290 x 0.335 0.335 0.350 0.350 y 0.220 0.260 0.280 0.240 y 0.310 0.350 0.370 0.330 x 0.290 0.290 0.305 0.305 x 0.350 0.350 0.365 0.365 y 0.240 0.280 0.305 0.265 y 0.330 0.370 0.390 0.350 x 0.305 0.305 0.320 0.320 x 0.365 0.365 0.380 0.380 y 0.265 0.305 0.330 0.290 y 0.350 0.390 0.410 0.370 2010/1/26 ? a wb1 wd1 ultra brightness led lamp BVU-5M5WI5 wd2 wc1 wa2 wc2 wa1 wb2 wa1 wa2 wb1 wb2 wc1 wc2 wd1 wd2 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.24 0.26 0.28 0.3 0.32 0.34 0.36 0.38 0.4
bright view electronics co.,ltd 2010/1/26 ? a ultra brightness led lamp BVU-5M5WI5 typical electrical / opti cal characteristic curves ambient temperature ta ( c ) ambient temperature ta ( c ) 0.5 0 1.0 0 forward voltage vf ( v ) forward current if ( ma ) 1.2 fig. 3 relative voltage vs. temperature 1.1 1.0 0.9 0.8 -50 -25 0 25 50 125 100 75 -50 -25 0 0.5 1.0 1.5 2.0 2.5 3.0 fig. 4 relative intensity vs. temperature ambient temperature ta ( c ) 050 25 75 100 125 fig. 5 relative intensity vs. wavelength ( p ) wavelength ( nm ) if-dc forward current ( ma ) 020406080100120 fig. 6 maximum forward current 0 2.8 3.2 3.6 4.0 2.4 0 forward intensity @ 20ma 700 600 500 400 0 40 30 20 10 relative intensity @ 20ma forward voltage @ 20ma ( ta = 25 c ) vs. temperature ( ta = 25 c ) 0 fig. 2 relative intensity vs. forward current relative intensity forward current if ( ma ) 1.0 1.5 2.5 2.0 3.0 0.5 10 20 30 40 0 ( ta = 25 c ) fig. 1 forward current vs. forward voltage forward current ( ma ) 35 40 15 25 20 30 5 10
bright view electronics co.,ltd caution for class 1 esd ( machine mode ) gallium nitride (gan) based light emitting diodes (leds) are extremely sensitive to electrostatic discharge (esd). users are strongly recommended to take necessary meter to test the static and avoid esd when handing these products. bright view's ba, gn, wi series products are gan based materials and are classified as "class 1",( esd endurance 50v or lower ), any manufacturing site or workstation where gan devices are handled should be rated and controlled at 50v or below. proper grounding of products or machines ( via 1m ? ), using static dissipative mats, static dissipative containers, static dissipative working uniferms and shoes are considered to be effective against esd. an ionizer is recommended in the facility or environment where esd may be generated easily, and soldering iron with a grounded tip is also recommended. to install a protection device in the led circuit to ensure the surge current and voltage not exceeding the max rating during on/off swithing. when inspecting the final products in which leds are assembled, it is recommended to check whether the assembled leds are damaged by esd or not. it is simple to find damaged leds by light-on or a vf test at lower current (below 1ma is recommended). esd damaged leds will show some unusual characteristics such as the remarkable increasing of leak current, the forward voltage become lower, or the leds do not light on at the low current. 2010/1/26 ? a ultra brightness led lamp BVU-5M5WI5
bright view electronics co.,ltd apply to lamp(dip) series. description: ( 1 ) manual soldering (solder iron) (1.1) temperature at tip of the iron: 300c max. (1.2) it's banned to load any stress on the resin during soldering. (1.3) soldering time: 5 sec. max.(one time only) (1.4) leave 1.6mm of minimum distance from the base of epoxy. ( 2 ) dip soldering(wave soldering-solder bath) (2.1) leave 1.6mm of minimum distance from the base of the epoxy. soldering beyond the base of the tie bar(stand off) is recommended. (2.2) when soldering, do not put stress on the leds during heating. (2.3) cutting the leadframes at high temperatures may cause led failure. (2.4) never take next process until the component is cooled down to room temperature after reflow. (2.5) after soldering, do not warp the circuit board. (2.6) the recommended dip soldering profile is the following: 2010/1/26 ? a ultra brightness led lamp BVU-5M5WI5 300.0 time ( sec. ) temperature ( c ) degree c. 275.0 225.0 250.0 150.0 125.0 175.0 200.0 100.0 75.0 25.0 50.0 0.0 0.0 50.0 150.0 100.0 300.0 250.0 200.0 max 260 c 5 sec. >20 c 4 c / sec. 150 c
bright view electronics co.,ltd 2010/1/26 ? a BVU-5M5WI5 ultra brightness led lamp fig. polybag / box a q'ty / polybag (pcs) device 3mm : 80,000pcs 5mm : 56,000pcs 4 boxes / carton 1000pcs blue / green / white : 36,000pcs 1000pcs 53 item no. device: q'ty pcs. n. w.: kgs. g. w.: kgs. 33 carton dimension(cm): 53*32*33 3mm(t-1) 5mm(t-1 3/4) blue / green / white 32 500pcs 20 bags 18 bags 14 bags r e y label 1 label 2 label 1 x: bin grade : wavelength : vf bvu-xxxxxxxx electronics co.,ltd. qa 29 box dimension(cm): 29*25*15 15 3mm or 5mm polybag bright view part no.: grade: lot no.: q'ty x- pcs - label 1 label 1 or label 2 attach on it. 25 type q'ty n,w g,w c.no pcs kgs kgs 3 anti-electrostatic bag electrostatic sensitive devices do not open or handle except at a static-free workstation electronics co.,ltd. bright view pcs lot no.: grade: q'ty part no.: qa label 2 bvu - x x x x x x x r stand-offs luminous grade -refer to the selection guide for bin options lens color -refer to lens color (1) to (9) dice code -refer to the selection guide lens configuration -refer to lens drawing view angle -refer to the selection guide (a) to (z) outline dimension -refer to the outline dimension pb - free / rohs compliant pb - free / rohs compliant
|
